Spartan Scientific Series 3505
The Spartan Scientific Series 3505 is a 2-Way, 2-Position, internally piloted solenoid valve for the control of air, emulsion, inert gases and water. The valve features an all brass body and a full flow 1/2” orifice while maintaining a 1.5 minimum pressure differential. The design allows for a tight seal on the orifice at 0 psi. Available in 1/4”, 3/8” and 1/2” NPT, the 3505 can handle pressures to 230 psi. The encapsulated coil construction ensures that the valve functions well under long periods of activation (100% duty), as well as providing a high degree of environmental protection (NEMA 4). The inner valve functions as a direct assist using a flat diaphragm and orifice plate. Pressure differentials shift the valve to full open or full closed. A push, non-locking manual override is standard.
Spartan Scientific Series 3510
The Spartan Scientific Series 3510 2-Way, 2-Position, internally piloted solenoid valve uses the latest technologies for materials and function. This combination provides the user with the highest quality, smallest size per Cv of flow and most competitive pricing of any valve on the market. The 3510 gives full flow throughout the pressure range starting with a Maximum Operating Pressure Differential of 1.5 psi while remaining sealed at 0 psi. The body is available in 1/4″, 3/8″ and 1/2″ NPT sizes and features a stainless steel anti-flex ring for port strength. The molded pilot section features a push, non-locking manual override, high cycle life solenoid parts, and quick connect DIN Style “A” EN175301-803 (Formerly DIN 43650) or “flying lead” electrical connection options. Typical applications include air, emulsion, inert gases, oil and water control, condensate drainage, hot water plumbing and sprinkler systems.
Spartan Scientific Series 3516
The Spartan Scientific Series 3516 2-Way, 2-Position Normally Closed or Normally Opened solenoid diaphragm process valve offers the highest flow for the smallest overall size in its class as compared to competitive units. The valve is designed from the ground up using modern design technologies and materials. The potable water brass body is media compatible, rugged and virtually indestructible. The body is available in 1/4”, 3/8” and 1/2” NPT. The low wattage solenoid features a DIN Style “A” EN175301-803 (Formerly DIN 43650) electrical interface and is nylon encapsulated. FKM, EPDM and NBR are standard elastomers and the operators are made of stainless steel/brass or stainless steel/brass with copper shading rings for AC versions. Typical applications include control of inert gases, water and compatible fluids.
Spartan Scientific Series 3580
The Spartan Scientific Series 3580 is an engineered composite 2-Way, 2-Position solenoid/air operated valve designed for the control of liquid media and inert gas. The valve exhibits a large 1/2” orifice and three port sizes standard, 1/4″, 3/8” and 1/2” NPT. The Normally Open version of the 3580 has a unique operator that allows for function without the use of a bypass tube as with the 3510 and has a push non-locking and a turn-lock manual override. There is no override available on the Normally Closed version of this valve. The valve’s compact design utilizes the latest in material sciences with the use of composite materials in the valve body. The solenoid pilot is power saving low wattage, made of stainless steel working components and is miniaturized to fit in tight places. Standard elastomers available are FKM, NBR, and EPDM. The fully encapsulated coils are available in all standard voltages and with spaded, flying leads or with a connector attached. Typical applications are for installations where there is a need to control inert fluids and gases, condensate drainage, hot water plumbing and sprinkler systems.
Spartan Scientific Series 3585
The Spartan Scientific Series 3585 2-Way, 2-Position solenoid diaphragm valve offers the highest flow for the lightest weight in its class. The valve is designed from the ground up using modern design technologies and materials. Featuring a full flow 1/2” (12.5 mm) orifice, the 3585 is available in either Normally Closed or Normally Open configurations. The nylon body is media compatible, light in weight, and by use of external metal port rings, is virtually indestructible. The Normally Open version of the valve features an optional turn lock manual override and has no external by-pass tube which eliminates leak points and size. The body is available in 1/4”, 3/8” and 1/2” NPT or BSP. The low wattage solenoid features a DIN 43650 Form A electrical interface and is nylon encapsulated. FKM, NBR and EPDM are standard elastomers and the operators are made of stainless steel / brass or stainless steel / brass with copper shading rings for AC versions. Typical applications include control of inert gases, water and compatible fluids.
Spartan Scientific Series 35KR
The Spartan Scientific Series 35KR 2-Way, 2-Position solenoid valve is a variation on the popular Series 3500 valves which feature miniaturized size vs. flow rate while allowing the user to manifold multiple outlets with one inlet. The 35KR design features the direct pilot design which controls 0 to 150 PSI in the all plastic version. The intermediate orifice plate design is the key to the 35KR in that it includes all the details of careful orifice design and creates a simple sealing pattern which can be mounted to integrated equipment and complex manifolds with simple mounting screws. The mounting style reduces leak points and numbers of connections. The 12mm orifice promotes full flow while the valve body, at only 1.5 inches wide, can be gang mounted to give impressively small envelope packages with many outputs. The simple mounting pattern is shown under dimensional data and can be machined into many varied manifold configurations.
Spartan Scientific Series 3680
The Spartan Scientific Series 3680 2-Way, 2-Position solenoid diaphragm valve offers the highest flow for the smallest overall size in its class. The valve is designed from the ground up using modern design technologies and materials. Featuring a full flow orifice, the 3680 is available in either Normally Closed or Normally Open configurations. The PEI body is media compatible, light in weight, and by use of external metal port rings, is virtually indestructible. The Normally Open version of the valve features an optional turn lock manual override and has no external by-pass tube which eliminates leak points and size. The body is available in 3/4” and 1” NPT. The low wattage solenoid features an Industry Standard 22 mm wide coil electrical interface and is nylon encapsulated. FKM, EPDM and NBR are standard elastomers and the operators are made of stainless steel / brass or stainless steel / brass with copper shading rings for AC versions. Typical applications include control of inert gases, water and compatible fluids.
Spartan Scientific Series 3685
The Spartan Scientific Series 3685 2-Way, 2-Position solenoid diaphragm valve offers the highest flow for the smallest overall size in its class. The valve is designed from the ground up using modern design technologies and materials. Featuring a full flow orifice, the 3685 is available in either Normally Closed or Normally Open configurations. The PEI body is media compatible, light in weight, and by use of external metal port rings, is virtually indestructible. The Normally Open version of the valve features an optional turn lock manual override and has no external by-pass tube which eliminates leak points and size. The body is available in 3/4” and 1.0” NPT. The low wattage solenoid features a DIN 43650 Form A electrical interface and is nylon encapsulated. FKM, EPDM and NBR are standard elastomers and the operators are made of stainless steel / brass or stainless steel / brass with copper shading rings for AC versions. Typical applications include control of inert gases, water and compatible fluids.
Spartan Scientific Series 45A0
The Spartan Scientific Series 45A0 2-Way, 2-Position Solenoid Valve is a brass bodied, stainless steel operator valve for electronic control of air, water or any seal compatible media. The versatile design is feature rich including with and without manual override, EPDM, FKM and NBR sealing materials and slow close anti-water hammer options. Additional special options include oxygen clean, and latching versions. Valves are available in 1/4”, 3/8” and 1/2” NPT and all standard AC and DC voltages. Coils are fully encapsulated and are available standard with flying lead and DIN 43650 form A with wire grip or 1/2” conduit as options.
Spartan Scientific Series 4700
The Spartan Scientific Series 4700 solenoid valves are designed specifically for high flow, high pressure applications. With orifice sizes of 20mm to 25mm and port sizes of 3/4” and 1” NPT, the valve is offered with a manual override standard. The coil is a quick connect DIN 43650 Form “A” design and is encapsulated for environment resistance. Typical applications include condensation removal, car washes, autoclaves or irrigation control.
